Industrial Rubber Sheets
Industrial rubber sheeting is sourced across a wide range of polymer types, each suited to different chemical, temperature, and wear conditions — supplied as roll or slab stock for gasket cutting, lining, insulation, and general industrial use.
General Purpose & Natural/SBR
Economical NR/SBR sheeting for general packing, gaskets, floor coverings, and insulation.
Abrasion Resistant (NR)
High-resilience natural rubber for tank, pipe, and chute lining in mining and cement.
Nitrile (NBR)
Oil and fuel-resistant sheeting for refineries, drilling rigs, and oil-exposed gaskets.
EPDM & Waterproofing Membrane
Ozone, weather, and heat-resistant sheeting for outdoor gaskets and roofing membranes.
Neoprene (CR)
Weather and oil-resistant sheeting for marine, outdoor, and corrosion-resistant coatings.
Silicone
Stable across extreme high and low temperatures; used for gaskets, seals, and pressure pads.
Butyl (IIR) & Hypalon (CSM)
Airtight, chemically resistant sheeting for chemical/fertilizer plants and electrical insulation.
Food Grade
Non-toxic, tasteless sheeting in NR, NBR, EPDM & CR for food and pharmaceutical use.
Insertion Jointing & Sponge
Fabric-reinforced jointing sheets and sponge rubber for flanges and vibration isolation.
SOURCING MODEL
Rubber sheet stock is sourced against the buyer's specification — polymer type, hardness, thickness, and finish — from qualified manufacturing partners, consolidated where possible with gasket and O-ring orders for the same buyer.
Rubber Sheet — Technical Reference
Typical industry reference ranges by polymer type, shown as guidance for specification planning. Exact hardness, thickness, and performance values are confirmed per order and backed by a Material Test Certificate at dispatch.
| Type | Polymer | Hardness (Shore A) | Temp. Range |
|---|---|---|---|
| General Purpose | NR/SBR | 65–75 | -20°C to +70°C |
| Abrasion Resistant | NR | 40–65 | -30°C to +70°C |
| Nitrile | NBR | 60–75 | -30°C to +110°C |
| EPDM | EPDM | 55–70 | -40°C to +150°C |
| EPDM Waterproofing Membrane | EPDM | 60–65 | -30°C to +130°C |
| Neoprene | CR | 60–75 | -30°C to +130°C |
| Silicone | SL | 50–60 | -60°C to +200°C |
| Butyl | IIR | 55–65 | -30°C to +130°C |
| Hypalon | CSM | 60–70 | -30°C to +130°C |
| Food Grade | NR/NBR/EPDM/CR | 60–65 | -25°C to +130°C |
| Insertion Jointing | NR/SBR | 50–80 | Reference: IS 638 |
Typical End Uses
Why Source Sheets With Us
- Polymer matched to your exact chemical/temperature exposure
- Consolidated with gasket, O-ring & valve orders
- Roll or slab format, custom thickness available
Before You Order
- Share polymer type, hardness, and thickness needed
- Confirm finish: smooth, fabric-inserted, or coated
- Lead time quoted per order at time of RFQ
Request Rubber Sheet Quote
Fill out the quick form below and our export team will respond with pricing and technical details.